[Hack a Day] 3 New Entries: Messing with barcodes

Messing with barcodes

[nico] just received his credentials for an upcoming conference. On each badge, there’s a 2D barcode with the participant’s bio and contact info. These are meant to be scanned by vendors for future contact. [nico] isn’t so interested in that and plans on updating his personal info by generating a new barcode. To this end, he’s collected a number of links to help out barcode hackers. He used the SWIPE toolkit to identify the format and decode (it has an online component too). There are also several online encoders you can use, like this one from [Terry Burton]. If you’re wondering what sort of shenanigans you can get into faking barcodes, check out [fx]’s presentation from 24C3.

[photo: seanbonner]

      

The EFF's privacy agenda

With a new administration coming into power, the Electronic Frontier Foundation feels that it’s time for a change (see what we did there). They’ve posted an agenda that covers fixing privacy issues that have come to the forefront in the last eight years. It involves repairing amendments that prevent corporations from being sued for warrantless wiretapping. They would also modernize the Electronic Communications Privacy Act so that it would cover modern technology. The heavily abused State Secrets Privilege needs reform as well. Their final issue is with REAL ID and datafarming that many state governments have already rejected. If even a bit of this gets fixed, we’ll be happy. In any case, it’ll be good to have a more tech focused administration that doesn’t need the internet explained to it in terms of dumptrucks and tubes.

[photo: Jake Appelbaum]

      

Easy high voltage power supply

[rocketman221] wrote up one of the simplest ways to build a high voltage power supply. This one in particular was used on his coilgun. Instead of building a custom circuit, he’s using flash charging boards from disposable cameras. Six 450V 470uF caps are wired in parallel to make up the bank. Two of the charger boards are wired to one switch to initiate the charging process. Four additional boards are wired two a second switch for the second charging stage. The part cost on this is incredibly cheap and it only requires a 3.3V input to reach 450V. The writeup has plenty of warnings about the dangers of high voltage; you need to clean off all flux residue to prevent arcing across the circuit boards. Embedded below is a video of the bank being discharged through several objects.

      

You received this email because you are subscribed to the real_time feed for http://hackaday.com/feed/. To change your subscription settings, please log into RSSFWD.