[Hack a Day] 4 New Entries: PCjr 25 years later

PCjr 25 years later

[Trixter], connoisseur of old hardware, is celebrating the 25th anniversary of the PCjr. IBM’s PCjr was killed only 18th months after being revealed and [Trixter] lays out exactly why. Overall, it was designed to be cheap to produce and sell, but many of the choices made it difficult to use. They used the CPU instead of DMA for floppy access; cheaper to make, but you couldn’t do much during disk reads because of it. The video memory scheme left little room for programs that could take advantage of it. It also had compatibility issues that made IBM clones a more attractive choice. [Trixter] ends by pointing out that some good came of it when the Tandy 1000 copyied the good ideas while leaving out the restrictive memory issues. He recommends Mike’s PCjr Page for more information on this classic machine.

      

Adjustable breadboard power supply

This looks like a great addition to your breadboard. [Nerdz] wanted a power supply that was easily portable and adjustable. He built a custom board that plugs directly into the breadboard’s power rails. It has a pot attached to the ground of a 7805 voltage regulator so the output can be adjusted from 5V to just under the supply voltage. Anything that makes a breadboard less of a rats nest is definitely a good thing.

      

Business card AVR board updated

Evil Mad Scientist Laboratories has updated their business card AVR breakout boards to version 1.1. We suspect the changes will probably make them even more popular. The boards are designed for the ATmegaXX8 family of microcontrollers. The center has all 28 pins labeled while either end has a prototyping area. An in-system programming header is also provided. For the new version, both prototyping areas have been increased to accommodate DIP14 packages. The holes for the microcontroller are now larger so that they can hold a ZIF socket. Finally, the power and ground traces have been expanded. We’ve always like the versatility of these boards, as demonstrated in the Tennis for Two project, and can’t help wondering if these updates were made to facilitate another project.

      

Stripboard Drawdio

When we posted about the Drawdio release, mentioned how simple the circuit was and that we wouldn’t be surprised if people adapted it. [Dylski] decided to build it using stripboard and parts he had laying around. He shows how he laid it out on paper so that it would fit on a 29×5 piece. It took some planning, but the end result is a perfectly functional as you can see in the video below.

[via ladyada]

      

You received this email because you are subscribed to the real_time feed for http://hackaday.com/feed/. To change your subscription settings, please log into RSSFWD.